Auto-open/close function for driver-side

1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
2. Remove the front door trim. (driver's side). (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
3. Remove the door lock switch. (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION .)
4. Verify that the continuity is as indicated in the table.

Courtesy of MAZDA MOTORS CORP.

Courtesy of MAZDA MOTORS CORP.

• If the continuity is not as indicated in the table, replace the door lock switch.