FixVault
Home › Mazda › 2020 › CX-5 Signature › Repair and Diagnosis › Electrical › Horns › Instrumentation/Driver Info › Active Driving Display Removal/Installation › Replacing active driving display as single component

Replacing active driving display as single component

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Meter Hood (See METER HOOD REMOVAL/INSTALLATION .)
    2. Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION .)
    3. Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION .)
  3. Remove the screws.
    G11427777Courtesy of MAZDA MOTORS CORP.
  4. Pull the active driving display outward.
    G11427778Courtesy of MAZDA MOTORS CORP.
  5. Disconnect the connector.
    G11427779Courtesy of MAZDA MOTORS CORP.
  6. Remove the active driving display.
  7. Install in the reverse order of removal.
About FixVault