FixVault
Home › Mazda › 2020 › CX-5 Signature › Repair and Diagnosis › External Pages › Different car › Section 278 (Instrumentation/Driver Info) › Indicator Unit Removal/Installation

Indicator Unit Removal/Installation

WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Selector lever knob (AT) (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION .)
    2. Shift lever knob (MT)
    3. Shift panel component (See SHIFT PANEL REMOVAL/INSTALLATION .)
    4. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION .)
    5. Parking brake lever boot panel (See PARKING BRAKE LEVER BOOT PANEL REMOVAL/INSTALLATION .)
    6. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION .)
    7. Front console panel (See FRONT CONSOLE PANEL REMOVAL/INSTALLATION .)
  3. Remove the screws.
    G11275188Courtesy of MAZDA MOTORS CORP.
  4. Remove the indicator unit.
  5. Disconnect the connector.
  6. Install in the reverse order of removal.
About FixVault