Using M-MDS
WARNING: This page is about a different car, the 2020 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the SSU.
- Select an item name, and then select option.POWER DOOR LOCK SYSTEM FUNCTION DESCRIPTION
M-MDS display Function Initial setting Setting contents Control unit Unlock Mode (With Touch Sensor). 2-step unlocking system can be set. Once: Driver's, Twice: All Doors. Once: All Doors./Once: Driver's, Twice: All Doors. Start stop unit Unlock Mode (Without Touch Sensor). 2-step unlocking system can be set. Once: Driver's, Twice: All Doors. Once: All Doors./Once: Driver's, Twice: All Doors. Start stop unit - For the auto door lock function, refer to the personalization features for the BCM. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE .)