Idle-Up Speed Control Inspection

NOTE:

The idle speed cannot be adjusted.
The M-MDS is required to verify the idle speed.

Complete the engine tune-up preparation. (See ENGINE TUNE-UP PREPARATION .)
Verify that the idle speed according to each load (M-MDS PID: RPM) is within the specification using the PID/data monitor function of the M-MDS (except idle speed decrease after applying load). (See PCM INSPECTION .)
- If the engine speed is not within the specification when a specified load is applied, inspect the related input parts, wiring harnesses, and connectors.
  Idle-up speed (P position or N position)
  
  A/C on: 650-800 rpm
  
  Electrical loads on: 650-800 rpm