With 360° View Monitor Control Module: Outline
DTC B14F7:64 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE - WITH 360° VIEW MONITOR CONTROL MODULE
| System malfunction location |
Configuration data of body control module (BCM) not matched |
| Detection condition |
- The vehicle control module (VCM) detects that the configuration data of the 360° view monitor control module and the body control module (BCM) is not matched for 10 s.
|
| Fail-safe |
(See DTC TABLE [VEHICLE CONTROL MODULE (US)]
.) |
| Possible cause |
- Malfunction in CAN communication line between body control module (BCM) and 360° view monitor control module
- Inappropriate 360° view monitor control module replacement procedure
- Configuration data of body control module (BCM) and 360° view monitor control module is not matched
- Body control module (BCM) configuration data write error
- Configuration not completed after 360° view monitor control module replacement
- 360° view monitor control module malfunction
- Body control module (BCM) malfunction
|
| System wiring diagram |
Not applicable |
| Connector diagram |
Not applicable |