FixVault

Simulation item table

WARNING: This page is about a different variant/trim than selected.
SIMULATION PART DESCRIPTION

Item Description Unit/Condition Operation condition
AUX_FLD_PUMP_DUTY_COMD Displays in the M-MDS but it does not operate.
AUX_RLY_B  
E_OIL_PUMP  
SHIFT_SOL_A_CUR  
SHIFT_SOL_B_CUR Shift solenoid No. 1 target current A Under the following conditions:
  • Vehicle stopped
  • Idling at P or N position
SHIFT_SOL_C_CUR Shift solenoid No. 2 target current A Under the following conditions:
  • Vehicle stopped
  • Idling at P or N position
SHIFT_SOL_D_CUR Shift solenoid No. 3 target current A Under the following conditions:
  • Vehicle stopped
  • Idling at P or N position
SHIFT_SOL_E_CUR Shift solenoid No. 4 target current A Under the following conditions:
  • Vehicle stopped
  • Idling at P or N position
SHIFT_SOL_ON_OFF On/off solenoid condition Off/On Under the following conditions:
  • Vehicle stopped
  • Idling at P or N position
TRQ_CON_CLTCH_CUR TCC control solenoid target current A Under the following conditions:
  • ATF temperature (PID: TFT) is 20°C {68°F} or more.
  • Output shaft speed (PID: OSS) is 10 rpm or more.
  • Turbine/input shaft speed (PID: TSS) is 1, 000 rpm or more.
  • Brake pedal released