FixVault
Home › Mazda › 2021 › 3 Base › Repair and Diagnosis › External Pages › Different variant/trim › Section 22 (Engine Mechanical System (VIN M)) › Engine Disassembly/Assembly › Exhaust Manifold Bracket Installation Note

Exhaust Manifold Bracket Installation Note

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily tighten the exhaust manifold bracket installation bolts.
  2. Tighten the bolt in the order shown in the figure.
Fig 1: Exhaust Manifold Bracket Bolts Tightening Sequence
G13174528Courtesy of MAZDA MOTORS CORP.
About FixVault