No-load Test

1. Verify that the battery is fully charged. (See BATTERY INSPECTION (US) .)
2. Connect the starter, battery, and a tester as shown in the figure.

   Courtesy of MAZDA MOTORS CORP.

3. Operate the starter and verify that it rotates smoothly.
   • If the starter does not rotate smoothly, inspect the starter unit.
4. Measure the voltage and current while the starter is operating.
   • If not within specification, replace the starter.

     Starter no-load test voltage 

     11 V

     Starter no-load test current 

90 A or less