Cautions on Chassis Dynamometer Use

When inspecting and servicing the powertrain on the dynamometer or speedometer tester, pay attention to the following:

NOTE:

If the engine cannot be stopped using the push button start, perform an emergency engine stop operation. (See Cautions for vehicles with Mazda Radar Cruise Control (MRCC) system/Mazda Radar Cruise Control with stop & go function (MRCC with stop & go function) system/Traffic Jam Assist (TJA)/Smart Brake Support (SBS) system/Smart Brake Support [Rear] (SBS-R) system/Smart Brake Support [Rear Crossing] (SBS-RC) system/Distance & Speed Alert (DSA)/Lane-keep assist system.)

Place a fan, preferably a vehicle-speed proportional type, in front of the vehicle.
Make sure the vehicle is in a facility with an exhaust gas ventilation system.
Keep the rear bumper cool by placing a cooling fan near the exhaust pipe so that the rear bumper does not get deformed by the heat from the exhaust.
Keep the area around the vehicle uncluttered so that heat does not build up.
Watch the water temperature gauge and do not overheat the engine.
Avoid added load to the engine and maintain normal driving conditions as much as possible.