FixVault
Home › Mazda › 2021 › 6 Signature › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting System › Light Switch Removal/Installation

Light Switch Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Rotate the steering wheel until the service hole in the position shown in the figure is visible.
    G11544728Courtesy of MAZDA MOTORS CORP.
  4. Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure.
    G11544729Courtesy of MAZDA MOTORS CORP.
  5. While pressing the light switch tab in the direction of the arrow (1) shown in the figure using a flathead screwdriver, pull out the light switch in the direction of the arrow (2) shown in the figure to detach the light switch tab from the start stop unit.
    G11544730Courtesy of MAZDA MOTORS CORP.
  6. Remove the light switch.
    G11544731Courtesy of MAZDA MOTORS CORP.
  7. Install in the reverse order of removal.
About FixVault