FixVault
Home › Mazda › 2021 › 6 Signature › Repair and Diagnosis › Accessories & Equipment › Infotainment › Entertainment System › Center Display Removal/Installation

Center Display Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Meter hood cover (See METER HOOD COVER REMOVAL/INSTALLATION .)
    2. Audio panel (See AUDIO PANEL REMOVAL/INSTALLATION .)
    3. Passenger-side decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
    4. Center panel (See CENTER PANEL REMOVAL/INSTALLATION .)
  3. Remove the bolt.
    Fig 1: Center Display Bolts With Torque Specification
    G12235096Courtesy of MAZDA MOTORS CORP.
  4. Pull the center display component in the order of arrows (1) and (2) shown in the figure, and detach clips from the dashboard.
    G12235097Courtesy of MAZDA MOTORS CORP.
  5. Disconnect the connectors.
    G12235098Courtesy of MAZDA MOTORS CORP.
  6. Remove the center display component.
  7. When replacing the center display, remove the connectivity master unit (CMU). (See CONNECTIVITY MASTER UNIT (CMU) REMOVAL/INSTALLATION .)
  8. Install in the reverse order of removal.
About FixVault