FixVault
Home › Mazda › 2021 › 6 Signature › Repair and Diagnosis › External Pages › Different car › Section 1 (Manual Transaxle - Overhaul [C66M-R]) › Primary Shaft Component Assembly › Synchronizer Ring Assembly Note

Synchronizer Ring Assembly Note

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Mazda 6, 2018 Mazda 3, 2017 Mazda 6, 2017 Mazda 3, and 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the projection of the synchronizer ring with the key groove of the clutch hub as shown in the figure, and assemble the synchronizer ring.
    Fig 1: Aligning Projection Of Synchronizer Ring With Key Groove Of Clutch Hub
    G08347863
About FixVault