FixVault
Home › Mazda › 2021 › 6 Signature › Repair and Diagnosis › External Pages › Different car › Section 1 (Manual Transaxle - Overhaul [C66M-R]) › Shift Control Module Assembly › Pin Assembly Note

Pin Assembly Note

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Mazda 6, 2018 Mazda 3, 2017 Mazda 6, 2017 Mazda 3, and 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Secure the shift control module in a vise.
    Fig 1: Securing Shift Control Module In Vise
    G08347831
  2. Align the switch pin and interlock sleeve markings.
    Fig 2: Aligning Switch Pin And Interlock Sleeve Markings
    G08347832
  3. Assemble a new pin (switch pin) using a punch.
    Fig 3: Assembling Pin (Switch Pin) Using Punch
    G08347833
  4. Move the control lever component to set the guide pin to the 5GR position of the guide plate.
    Fig 4: Identifying Guide Pin And 5GR Position
    G08347834
  5. Assemble a new pin (control lever component) using a punch.
    Fig 5: Assembling Pin (Control Lever Component) Using Punch
    G08347835
About FixVault