Pre-Delivery Inspection Table: Exterior
INSPECT and ADJUST, if necessary, the following items to specification:
- Glass, exterior bright metal and paint for damage
- Wheel lug nuts
- All weatherstrips for damage or detachment
- Adjust tire pressures to specification
- Adjust the tire pressures when the tires are cool.
- Specified pressure is indicated on the door label.
TIRE PRESSURE INSPECTION
| Tire pressure record | ||||
| Left front | Right front | Left rear | Right rear | Spare |
- After adjusting the tire pressures, switch the ignition ON (engine off or on) and long-press the tire pressure monitoring system set switch until the tire pressure warning light flashes two times and the buzzer sounds one time (with tire pressure monitoring system switch).
TIRE PRESSURE MONITORING SYSTEM SET SWITCH
| Indicated that long-pressing of the tire pressure monitoring system set switch was implemented |
| Yes or No |
- Headlight cleaner and fluid level (if equipped)
- Operation of hood release and lock
- Headlight aiming
- Door operation and alignment including side door and back door
- Operation of fuel-filler lid opener
- Pour one bottle of deposit cleaner into the fuel tank (Specified countries only)
- Refuel the vehicle after adding the deposit cleaner or inform the customer to do so immediately
- For details on the specified countries, please refer to the service information
INSTALL the following parts:
- Wheel caps or rings (if equipped)