Section 26 (Engine Control System (VIN 5))
WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Accelerator Pedal Position (App) Sensor Inspection
- Accelerator Pedal Position (App) Sensor Removal/Installation
- Air Fuel Ratio (A/F) Sensor Inspection
- Air Fuel Ratio (A/F) Sensor Removal/Installation
- Barometric Pressure (BARO) Sensor Inspection
- Barometric Pressure (BARO) Sensor Removal/Installation
- Camshaft Position (CMP) Sensor Inspection
- Camshaft Position (CMP) Sensor Removal/Installation
- Clutch Pedal Position (CPP) Switch Inspection
- Clutch Stroke Sensor Inspection
- Control System Diagram
- Control System Location Index
- Control System Wiring Diagram
- Coolant Control Valve Position Sensor Inspection
- Coolant Control Valve Position Sensor Removal/Installation
- Crankshaft Position (CKP) Sensor Inspection
- Crankshaft Position (CKP) Sensor Removal/Installation
- Engine Coolant Temperature (ECT) Sensor Inspection
- Engine Coolant Temperature (ECT) Sensor Removal/Installation
- Engine Oil Data Reset
- Engine Oil Level Sensor Inspection
- Engine Oil Level Sensor Removal/Installation
- Engine Oil Pressure Sensor Inspection
- Engine Oil Temperature Sensor Inspection
- Engine Oil Temperature Sensor/Engine Oil Pressure Sensor Removal/Installation
- Fuel Pressure Sensor Inspection
- Fuel Pressure Sensor Removal/Installation
- Fuel Tank Pressure Sensor Inspection
- Fuel Tank Pressure Sensor Removal/Installation
- Heated Oxygen Sensor (Ho2S) Inspection
- Heated Oxygen Sensor (Ho2S) Removal/Installation
- Intake Air Temperature (IAT) Sensor Inspection
- Ion Sensor Inspection
- Ion Sensor Removal/Installation
- Knock Sensor (KS) Inspection
- Knock Sensor (KS) Removal/Installation
- Manifold Absolute Pressure (Map) Sensor Inspection
- Manifold Absolute Pressure (Map) Sensor/Intake Air Temperature (IAT) Sensor No. 2 Removal/Installation
- Mass Air Flow (MAF) Sensor Inspection
- Mass Air Flow (MAF) Sensor/Intake Air Temperature (IAT) Sensor No. 1 Removal/Installation
- Neutral Switch Inspection
- Pcm Configuration (Using As-Built Data)
- Pcm Configuration (Using Read/Write Function)
- Pcm Inspection
- Without Using The M-MDS
- Notes
- Terminal Voltage Table (Reference)
- Inspection Using An Oscilloscope (Reference)
- CKP Signal
- Electric Variable Valve Timing Driver (Diagnostic) Signal
- Generator Output Voltage
- Purge Control
- IGT1, IGT2, IGT3, IGT4 Control
- Electric Variable Valve Timing Motor (Rotation Pulse) Signal
- Electric Variable Valve Timing Motor (Rotation Direction) Signal
- Generator Field Coil Control Signal
- Intake CMP Signal
- Electric Variable Valve Timing Control Signal
- Exhaust CMP Signal
- A/F Sensor Heater Control Signal
- Engine Oil Control Signal
- Hydraulic Variable Valve Timing Control Signal
- Drive-By-Wire Control (+) Signal
- Fuel Injection Control (+) Signal
- Fuel Injection Control (-) Signal
- High Pressure Fuel Pump Control (+) Signal
- High Pressure Fuel Pump Control (-) Signal
- Fuel Pump Control Signal
- Fuel Pump Control Module (Diagnostic) Signal
- HO2S Heater Control Signal
- Using The M-MDS
- Without Using The M-MDS
- Pcm Removal/Installation
- Throttle Position (TP) Sensor Inspection
- Throttle Position (TP) Sensor Removal/Installation