LED Illumination Inspection
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
- Remove the upper column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
- Remove the meter hood. (See METER HOOD REMOVAL/INSTALLATION .)
- Remove the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)
- Apply battery positive voltage and connect the ground to the push button start terminals and verify that the LED illuminates as indicated in the table.
- If the LED does not illuminate as indicated in the table, replace the push button start. (See PUSH BUTTON START REMOVAL/INSTALLATION .)