FixVault
Home › Mazda › 2021 › CX-3 AWD › Repair and Diagnosis › External Pages › Different car › Section 34 (Security And Locks) › Front Door Key Cylinder Switch Inspection › Notes

Front Door Key Cylinder Switch Inspection: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the front door glass preparation. (Refer to FRONT DOOR GLASS REMOVAL/INSTALLATION .)
  2. Disconnect the negative battery cable. (Refer to NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
  3. Remove the following parts:
    1. Power window main switch (Driver's side) (Refer to POWER WINDOW MAIN SWITCH INSPECTION .)
    2. Front door trim (Refer to FRONT DOOR TRIM REMOVAL/INSTALLATION .)
    3. Front inner handle (Refer to INNER HANDLE REMOVAL/INSTALLATION .)
    4. Front door glass (Refer to FRONT DOOR GLASS REMOVAL/INSTALLATION .)
    5. Front door module panel (Refer to FRONT DOOR MODULE PANEL REMOVAL/INSTALLATION .)
    6. Front door key cylinder (Refer to FRONT DOOR KEY CYLINDER REMOVAL/INSTALLATION .)
    7. Front door latch and lock actuator (Refer to FRONT DOOR LATCH AND LOCK ACTUATOR REMOVAL/INSTALLATION .)
About FixVault