Selection of Procedure for Immobilizer System-Related Parts Programming: Notes
WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
- Verify that the ROOM fuse, AT fuse, and SRS2/ESCL fuse are installed.
- Select the applicable programming procedure from the service content of the immobilizer system-related parts.
Immobilizer System-Related Parts Service and Programming Procedure Table
| No. | Service | Programming procedure | |
|---|---|---|---|
| 1 | Additional remote transmitter programming | Have remote transmitter that can start engine | (Refer to No. 1 Additional Remote Transmitter Programming Procedure (Using the M-MDS) .) |
| 2 | Programming due to PCM replacement | (Refer to No. 2 Programming Procedure After PCM Replacement .) | |
| 3 | Start stop unit replacement and programming due to simultaneous replacement of start stop unit/PCM | (Refer to No. 3 Start stop unit replacement and programming procedure due to simultaneous replacement of start stop unit/PCM .) | |
| 4 | Remote transmitter replacement or clearing | (Refer to No. 4 Remote transmitter replacement or remote transmitter clearing .) | |
| 5 | Additional remote transmitter programming | There is no remote transmitter available that can start engine | (Refer to No. 5 Additional Remote Transmitter Programming Procedure (If there is no remote transmitter available that can start engine) (Using M-MDS) .) |