Rear Wiper Motor Removal/Installation: Notes

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
Remove the rear wiper arm and blade. (See REAR WIPER ARM AND BLADE REMOVAL/INSTALLATION .)
Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
Disconnect the connector.

Fig 1: Identifying Rear Wiper Motor And Connector
Courtesy of MAZDA MOTORS CORP.
Remove the bolts. (See Rear Wiper Motor Installation Note .)

Fig 2: Identifying Rear Wiper Motor, Outer Bushing, Pin And Bolts
Courtesy of MAZDA MOTORS CORP.
Pull out the rear wiper motor pin from the outer bushing and remove the rear wiper motor.
Remove the outer bushing.

Fig 3: Identifying Outer Bushing
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.