Sun visor REMOVAL/INSTALLATION

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
Insert a tape-wrapped flathead screwdriver into the position shown in the illustration.

Courtesy of MAZDA MOTORS CORP.
Move the tape-wrapped flathead screwdriver in the direction of the arrow shown in the illustration, detach the tab, and remove the Sun visor cap.

Courtesy of MAZDA MOTORS CORP.
Remove the screw.

Courtesy of MAZDA MOTORS CORP.
Move the Sun visor in the direction of the arrow shown in the illustration and detach the hook.

Courtesy of MAZDA MOTORS CORP.
Disconnect the vanity mirror illumination connector. (with vanity mirror illumination)
When removing the center adapter, perform the following procedure:
1. Using a tape-wrapped flathead screwdriver, press the center adapter tab in the direction of arrow (1) shown in the illustration, and remove the center adapter in the direction of arrow (2).
Courtesy of MAZDA MOTORS CORP.
Install in the reverse order of removal.