Rear Power Window Regulator Installation Note

WARNING: This page is about a different car, the 2020 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.

The rear power window regulator installation work can be facilitated by performing the following procedure:

Temporarily tighten the nut shown in the illustration.

Courtesy of MAZDA MOTORS CORP.

Insert the rear power window regulator from the service hole cover No. 1 installation hole.

Courtesy of MAZDA MOTORS CORP.

Hook the temporarily tightened nuts to the rear door panel.

Courtesy of MAZDA MOTORS CORP.