FixVault
Home › Mazda › 2021 › CX-5 Signature › Repair and Diagnosis › Engine Mechanical › Fuel System (VIN Y) › High Pressure Fuel Pump Removal/Installation › Protector Installation Note

Protector Installation Note

  1. Install the protector.
    G11436397Courtesy of MAZDA MOTORS CORP.
    TIGHTENING TORQUE SPECIFICATION

    Tightening torque
    A: 8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}
    B: 20-26 N.m {2.1-2.6 kgf.m, 15-19 ft.lbf}
  2. Install the ground cable to the protector.
    G11436393Courtesy of MAZDA MOTORS CORP.
    TIGHTENING TORQUE SPECIFICATION

    Tightening torque
    8-11 N.m {82-112 kgf.cm, 71-97 in.lbf}
  3. Install the clip to the protector.
    G11436392Courtesy of MAZDA MOTORS CORP.
About FixVault