Setting method by operation of remote transmitter button
WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
- The following setting can be changed by operation of the remote transmitter button.
M-MDS display Function Initial setting Setting content Control unit Keyless Lock Beep Volume. The keyless beeper volume can be adjusted. Medium Off/Low/Medium/High Start stop unit - Change the setting for the keyless beeper volume referring to the following procedure:
NOTE:
- If any of the following conditions is met during procedure, the setting for changing the keyless beeper volume is finished.
- The ignition is switched to ACC or ON (engine off or on).
- The Driver's door is closed.
- The liftgate is open.
- The remote transmitter operation is not performed for approx. 10 s.
- The UNLOCK button on the remote transmitter is pressed.
- A request switch is pressed.