Front Stabilizer Component Installation Note

WARNING: This page is about a different car, the 2017 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.

Temporarily tighten bolts A and B shown in the figure.

Fig 1: Front Stabilizer Component Bolts
Courtesy of MAZDA
Tighten bolt B.
Tightening torque

25-29 N.m {2.6-2.9 kgf.m, 19-21 ft.lbf}
Tighten bolt A.
Tightening torque

25-29 N.m {2.6-2.9 kgf.m, 19-21 ft.lbf}
Tighten bolt B.
Tightening torque

25-29 N.m {2.6-2.9 kgf.m, 19-21 ft.lbf}