FixVault
Home › Mazda › 2021 › CX-9 Signature › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Entertainment System › Rear Mount Camera Removal/Installation

Rear Mount Camera Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
    2. Liftgate side trim (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
    3. Liftgate recess cover (See LIFTGATE RECESS REMOVAL/INSTALLATION .)
    4. Power liftgate (PLG) rear switch (with power liftgate) (See POWER LIFTGATE (PLG) REAR SWITCH REMOVAL/INSTALLATION .)
    5. Liftgate lower trim (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
    6. Rear finisher (See REAR FINISHER REMOVAL .) (See REAR FINISHER INSTALLATION .)
  3. Remove the rear mount camera while detaching the tabs of the rear finisher.
    G11431042Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
  5. Perform the 360° view monitor system aiming. (with 360° view monitor system) (See 360°VIEW MONITOR SYSTEM AIMING .)
About FixVault