FixVault
Home › Mazda › 2021 › CX-9 Signature › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Interior Trim › Shift Panel Removal/Installation

Shift Panel Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the selector lever knob. (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)
  3. Hold the shaded area shown in the figure, remove the shift panel in the direction of the arrows in the order of (1), (2) while detaching clips A and clips B.
    G11435009Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the connector.
    G11435010Courtesy of MAZDA MOTORS CORP.
  5. Remove the shift panel.
  6. When replacing the shift panel, perform the following procedure: (without wireless charger (Qi))
    1. Remove the front console box when replacing the shift panel while detaching the clips.
    G11435011Courtesy of MAZDA MOTORS CORP.
  7. When replacing the shift panel, remove the wireless charger (Qi). (with wireless charger (Qi)) (See WIRELESS CHARGER (Qi) REMOVAL/INSTALLATION .)
  8. Install in the reverse order of removal.
About FixVault