FixVault

Front Side Speaker Removal/Installation

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If the procedure is performed while holding the front side speaker cone, it could deform the cone causing a malfunction. Therefore, perform the procedure while holding any part other than the cone.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the side speaker grille. (See SPEAKER GRILLE REMOVAL/INSTALLATION .)
  3. Remove the screws.
    Fig 1: Front Side Speaker And Screws
    G11431026Courtesy of MAZDA MOTORS CORP.
  4. Remove the front side speaker.
  5. Disconnect the front side speaker connector.
  6. Install in the reverse order of removal.