Fuel Tank Insulator Removal Note

WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The fuel tank insulator are installed using rivets.

Push out the mandrel using a hammer and punch (2-2.8 mm {0.08-0.11 in} diameter).

Fig 1: Pushing Out Mandrel Using Hammer And Punch
Courtesy of MAZDA MOTORS CORP.
Remove the flange using a drill (5 mm {0.20 in} drill bit).

Fig 2: Removing Flange

G11450872

Courtesy of MAZDA MOTORS CORP.