FixVault
Home › Mazda › 2021 › CX-9 Signature › Repair and Diagnosis › External Pages › Different car › Section 16 (Lighting System) › Front Fog Light Inspection

Front Fog Light Inspection

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the steering wheel in the direction opposite to the side on which the light is to be removed.
  2. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Remove the following parts:
    1. Front deflector (See FRONT DEFLECTOR REMOVAL/INSTALLATION .)
    2. Front over fender (See FRONT OVER FENDER REMOVAL/INSTALLATION .)
    3. Front mudguard (See FRONT MUDGUARD REMOVAL/INSTALLATION .)
  4. Remove the front fog light. (See FRONT FOG LIGHT REMOVAL/INSTALLATION .)
  5. Apply battery voltage to front fog light terminal A, and connect terminal B to ground.
    Fig 1: Applying Battery Voltage To Front Fog Light Terminal A
    G11435105Courtesy of MAZDA MOTORS CORP.
  6. Verify that the front fog light is turned on.
About FixVault