FixVault
Home › Mazda › 2021 › CX-9 Signature › Repair and Diagnosis › External Pages › Different car › Section 17 (Security And Locks) › Inner Handle Removal/Installation › Rear Inner Handle

Rear Inner Handle

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the rear door trim. (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
  3. Disconnect the door lock knob cable and the inner handle cable from the rear inner handle.
    Fig 1: Rear Inner Handle And Door Lock Knob Cable
    G11432719Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
About FixVault