FixVault
Home › Mazda › 2021 › CX-9 Signature › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle (Service Information) › Drive Plate Removal/Installation › Drive Plate Installation Bolts Removal Note

Drive Plate Installation Bolts Removal Note

  1. Set the SST against the drive plate.
    Fig 1: Drive Plate Installation Bolts Tightening Sequence
    G11441127Courtesy of MAZDA MOTORS CORP.
  2. Loosen the drive plate installation bolts uniformly in two or three steps in the order shown in the figure, then remove the bolts and the drive plate.
About FixVault