FixVault
Home › Mazda › 2021 › MX-5 Miata Club, Automatic Trans › Repair and Diagnosis › External Pages › Different car › Section 13 (Conventional Brake System) › Power Brake Unit Inspection › Using SST › After-inspection procedure

After-inspection procedure

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. After the inspection, remove the SSTs  , install the brake pipe to the original position, and then bleed the air from the brake line. (See BRAKE HOSE (FRONT) REMOVAL/INSTALLATION [WITH SINGLE PISTON CALIPER] .) (See BRAKE HOSE (FRONT) REMOVAL/INSTALLATION [WITH 4-POT OPPOSED PISTON CALIPER] .) (See BRAKE FLUID AIR BLEEDING .)
About FixVault