Visual Inspection
WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- When replacing the CKP sensor, make sure there is no foreign matter on it such as metal shavings. If it is installed with foreign matter, the sensor output signal will malfunction resulting from fluctuation in magnetic flux and cause a deterioration in engine control.
- Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
- Lift up the vehicle.
- Remove the front under cover. (See FRONT UNDER COVER REMOVAL/INSTALLATION .)
- Disconnect the CKP sensor connector.
- Remove the bolt. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION .)
- Remove the CKP sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION .)
- Verify that there are no metal shavings on the sensor.
- If there is a malfunction, remove any metal shavings that are adhering.