FixVault
Home › Mazda › 2022 › 3 Base › Repair and Diagnosis › External Pages › Different car › Section 113 (Intake-Air System (VIN M)) › Intake-Air System Removal/Installation › Intake Manifold Installation Note

Intake Manifold Installation Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the intake manifold.
  2. Connect the wiring harness clip to the intake manifold shown in the figure.
G12532654Courtesy of MAZDA MOTORS CORP.
About FixVault