Front Ultrasonic Sensor Inspection

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The integrity of the front ultrasonic sensor cannot be determined from a single part. When inspecting the front ultrasonic sensor, perform the following procedure.

Connect the M-MDS to the DLC-2.
Perform the DTC inspection for the parking assist unit (ultrasonic) and verify if any DTCs related to the front ultrasonic sensor is detected. (See DTC INSPECTION .)
- If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC TABLE [PARKING ASSIST UNIT (ULTRASONIC) (US)] .)
- If DTCs are not detected, repair the malfunctioning location according to the symptom troubleshooting. (See SYMPTOM TROUBLESHOOTING [PARKING ASSIST SYSTEM] .)