FixVault
Home › Mazda › 2022 › 3 Base › Repair and Diagnosis › External Pages › Different car › Section 15 (Glass/Windows/Mirrors) › Front Door Glass Run-Channel Removal/Installation (Us) › Common Procedure › Notes

Common Procedure: Notes

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the front door glass preparation. (See FRONT DOOR GLASS REMOVAL/INSTALLATION .)
  2. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
  3. Remove the following parts:
    1. Front door speaker grille (See SPEAKER GRILLE REMOVAL/INSTALLATION .)
    2. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
    3. Power window main switch (to remove from driver's side) (See POWER WINDOW MAIN SWITCH REMOVAL/INSTALLATION .)
    4. Power window sub switch (front) (to remove from passenger's side) (See POWER WINDOW SUB SWITCH REMOVAL/INSTALLATION .)
    5. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION (US) .)
    6. Front inner handle (See INNER HANDLE REMOVAL/INSTALLATION .)
    7. Front door glass (See FRONT DOOR GLASS REMOVAL/INSTALLATION .)
    8. Sail garnish (See SAIL GARNISH REMOVAL/INSTALLATION .)
    9. Front beltline molding (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION .)
    10. Front door garnish (See FRONT DOOR GARNISH REMOVAL/INSTALLATION .)
  4. Remove the fastener.
    G13717090Courtesy of MAZDA MOTORS CORP.
  5. Perform front door glass run-channel removal/installation according to the flow. (See FLOW .)
About FixVault