Rear Power Window Regulator Installation Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

The rear power window regulator installation work can be facilitated by performing the following procedure:

Temporarily tighten the nut shown in the figure.

Courtesy of MAZDA MOTORS CORP.

Insert the rear power window regulator from the service hole cover No. 2 installation hole.

Courtesy of MAZDA MOTORS CORP.

Hook the temporarily tightened nuts to the rear door panel.

Courtesy of MAZDA MOTORS CORP.