Coupling Component Temperature Sensor Inspection
WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION (US) .)
- Disconnect the AWD solenoid connector.
- Measure resistance between AWD solenoid terminals C and D.
- If the resistance is not within the specification, replace the coupling component. (See COUPLING COMPONENT REMOVAL/INSTALLATION (US) .)
Coupling component temperature sensor specification
Resistance (kil ohm)
6.085-6.961 kilohms (Temperature at 20°C {68°F})
- If the resistance is not within the specification, replace the coupling component. (See COUPLING COMPONENT REMOVAL/INSTALLATION (US) .)