FixVault
Home › Mazda › 2022 › 3 Base › Repair and Diagnosis › External Pages › Different car › Section 4 (Interior Trim) › Front Side Trim Removal/Installation

Front Side Trim Removal/Installation

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front scuff plate. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION .)
  2. Partially peel back the seaming welt.
    G13179437Courtesy of MAZDA MOTORS CORP.
  3. Remove the fastener.
    G13179438Courtesy of MAZDA MOTORS CORP.
  4. Pull the front side trim in the direction of the arrow shown in the figure and remove it while detaching the clip.
    G13179439Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
About FixVault