FixVault
Home › Mazda › 2022 › 3 Base › Repair and Diagnosis › External Pages › Different car › Section 5 (Security And Locks) › Rear Outer Handle Removal/Installation › Cap Installation Note

Cap Installation Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten the screw while holding the cap, and return the retainer to its original position.
G13179147Courtesy of MAZDA MOTORS CORP.
About FixVault