FixVault
Home › Mazda › 2022 › 3 Base › Repair and Diagnosis › External Pages › Different car › Section 70 (Dynamic Stability Control (Service Information)) › DSC HU/Control Module REMOVAL/INSTALLATION [L.H.D. (US)] › Nuts Installation Note

Nuts Installation Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Tighten nut A to the specified torque.
    G13558401Courtesy of MAZDA MOTORS CORP.
  2. Tighten nut B to the specified torque.
About FixVault