FixVault
Home › Mazda › 2022 › CX-30 Select › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Keyless Receiver Removal/Installation

Keyless Receiver Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
  2. Remove the following parts:
    1. Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION .)
    2. Trunk side upper trim (LH)
    3. (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION .)
    4. C-pillar trim (LH)
    5. (See C-PILLAR TRIM REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
    Fig 1: Keyless Receiver Bolt With Torque Specification
    G13560391Courtesy of MAZDA MOTORS CORP.
  4. Remove the bolt.
  5. Remove the keyless receiver.
  6. Install in the reverse order of removal.
About FixVault