FixVault
Home › Mazda › 2022 › CX-5 S Select › Repair and Diagnosis › Electrical › Gauges › On-Board Diagnostic - Instrument Cluster › PID/Data Monitor Table

PID/Data Monitor Table

- : Not applicable 

PID/DATA MONITOR DESCRIPTION

PID Unit/Operation Data contents Module control terminal
AFS_ST(7) Off/On
  • Off: Adaptive front lighting system (AFS) is not operated
  • On: Adaptive front lighting system (AFS) is operated
 -
AT_MAN_M_SW Off/On/Reserved/Unknown
  • Off: Selector lever is not in M position.
  • On: Selector lever is in M position.
  • Reserved:-
  • Unknown: M position switch signal is not determined.
 H
AT_S_DWN_SW Off/On/Reserved/Unknown
  • Off: Selector lever is not in shift-down position (-).
  • On: Selector lever is in shift down position (-).
  • Reserved:-
  • Unknown: Down switch signal is not determined.
 G
AT_S_UP_SW Off/On/Reserved/Unknown
  • Off: Selector lever is not in shift up position (+).
  • On: Selector lever is in shift up position (+).
  • Reserved:-
  • Unknown: Up switch signal is not determined.
 F
BSM/RVM_SW(1) Off/On
  • Off: Blind spot monitoring (BSM) OFF switch is off.
  • On: Blind spot monitoring (BSM) OFF switch is on.
 V
DIM_CSW(2) Off/On
  • Off: Dimmer cancel switch is off.
  • On: Dimmer cancel switch is on.
 -
DSC_OFF_SW Off/On
  • Off: TCS OFF switch (without OFF-road Traction Assist)/OFF-road Traction Assist switch (with OFF-road Traction Assist) is off.
  • On: TCS OFF switch (without OFF-road Traction Assist)/OFF-road Traction Assist switch (with OFF-road Traction Assist) is on.
 V
FUEL_GAUGE(3) L Displays fuel level detected by the fuel gauge. -
FUEL_SEN_M ohm Displays fuel gauge sender unit resistance value. -
V  
NOTE:
  • Displays in the M-MDS but it does not operate.
FUEL_SEN_S(4) ohm Displays fuel gauge sender unit (sub) resistance value. -
V  
NOTE:
  • Displays in the M-MDS but it does not operate.
I_ILLUMI_M Off (Day)/On (Night)
  • Off (Day): TNS (parking lights) switch is off.
  • On (Night): TNS (parking lights) switch is on.
  • B
  • D
I-ST_OFF_SW Off/On  
NOTE:
  • Displays in the M-MDS but it does not operate.
LDWS_ON_SW(5) Off/On
  • Off: LDWS switch is off.
  • On: LDWS switch is on.
 V
MULTI_SW_ST O.K./FAULT
  • O.K.: Cluster switch is normal.
  • FAULT: Cluster switch is malfunctioning.
 V
ODO_CNT km, ft, mi Displays rolling count of the odometer -
P_BRAKE_SW Off/On
  • Off: Electric parking brake switch is pressed.
  • On: Electric parking brake switch is pulled up.
 L
PCONSW(2) % Displays the brightness of the illumination lights -
R_GEAR_SW Off/On  
NOTE:
  • Displays in the M-MDS but it does not operate.
R_LMP Off/On/Unknown/Fault
  • Off: Selector lever is not in R position
  • On: Selector lever is in R position
  • Unknown: Back-up light signal is not determined.
  • Fault: Back-up light malfunction
  • B
  • D
SPEEDOMTR KPH, MPH Displays vehicle speed -
TACHOMETER RPM Displays engine speed -
TM_CLPOS(2) 2Positions/P/R/N/D/S(2)/L(1)/- Displays the selector lever position
  • B
  • D
TOTAL_TIME hh:mm:ss Displays cumulative elapsed time since vehicle completion -
TPMS_CAL_SW Off/On
  • Off: Tire pressure monitoring system (TPMS) set switch is off.
  • On: Tire pressure monitoring system (TPMS) set switch is on.
 V
TPRE_LMOD Normal/Error This PID indicates supply voltage (wheel unit No. 4). -
VPWR V Displays power supply voltage
  • S
  • U
WU1_ERR_P Normal/Error This PID indicates tire pressure status (wheel unit No. 1). -
WU1_ERR_T Normal/Error This PID indicates tire air temperature status (wheel unit No. 1). -
WU1_ID(6) HexData This PID indicates registered wheel unit ID (wheel unit No. 1). -
WU1_T(6) °C, F This PID indicates tire air temperature (wheel unit No. 1). -
WU1_VPWR(6) Normal/Error This PID indicates supply voltage (wheel unit No. 1). -
WU2_ERR_P Normal/Error This PID indicates tire pressure status (wheel unit No. 2). -
WU2_ERR_T Normal/Error This PID indicates tire air temperature status (wheel unit No. 2). -
WU2_ID(6) HexData This PID indicates registered wheel unit ID (wheel unit No. 2). -
WU2_P(6) KPa, MPa This PID indicates tire pressure (wheel unit No. 2). -
WU2_T(6) °C, F This PID indicates tire air temperature (wheel unit No. 2). -
WU2_VPWR(6) Normal/Error This PID indicates supply voltage (wheel unit No. 2). -
WU3_ERR_P Normal/Error This PID indicates tire pressure status (wheel unit No. 3). -
WU3_ERR_T Normal/Error This PID indicates tire air temperature status (wheel unit No. 3). -
WU3_ID(6) HexData This PID indicates registered wheel unit ID (wheel unit No. 3). -
WU3_P(6) KPa, MPa This PID indicates tire pressure (wheel unit No. 3). -
WU3_T(6) °C, F This PID indicates tire air temperature (wheel unit No. 3). -
WU3_VPWR(6) Normal/Error This PID indicates supply voltage (wheel unit No. 3). -
WU4_ERR_P(6) Normal/Error This PID indicates tire pressure status (wheel unit No. 4). -
WU4_ERR_T Normal/Error This PID indicates tire air temperature status (wheel unit No. 4). -
WU4_ID(6) HexData This PID indicates registered wheel unit ID (wheel unit No. 4). -
WU4_P(6) KPa, MPa This PID indicates tire pressure (wheel unit No. 4). -
WU4_T(6) °C, F This PID indicates tire air temperature (wheel unit No. 4). -
WU4_VPWR(6) Normal/Error This PID indicates supply voltage (wheel unit No. 4). -
(1) With blind spot monitoring (BSM) system

(2) If equipped

(3) With instrument cluster (Type B or C)

(4) AWD

(5) With lane departure warning system (LDWS)

(6) With tire pressure monitoring system (TPMS)

(7) With adaptive front lighting system (AFS)
About FixVault