Buckle Switch Inspection: Rear

1. Switch the ignition off.
2. Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION ).
3. Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION ).
4. Remove the rear buckle. (See REAR BUCKLE REMOVAL/INSTALLATION ).
5. Inspect for continuity between the buckle switch terminals using a tester.

Courtesy of MAZDA MOTORS CORP.

• If not as indicated in the table, replace the rear buckle. (See REAR BUCKLE REMOVAL/INSTALLATION ).

Courtesy of MAZDA MOTORS CORP.