Diagnostic Procedure
DTC U0336:00 (DSC HU/CM) DIAGNOSTIC PROCEDURE
| Step | Inspection | Results | Action |
|---|---|---|---|
| 1 | VERIFY SAS CONTROL MODULE DTC
|
Yes | Go to applicable DTC inspection. (See DTC TABLE [SAS CONTROL MODULE (TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.)] ). DTC troubleshooting completed, then go to the next step. |
| No | Go to the next step. | ||
| 2 | VERIFY DTC TROUBLESHOOTING COMPLETED
|
Yes | Repeat the inspection from Step 1 If the malfunction recurs, replace the SAS control module, then go to the next step. (See SAS CONTROL MODULE REMOVAL/INSTALLATION (US/CANADA) . |
| No | Go to the next step. | ||
| 3 | VERIFY NO DTC IS PRESENT
|
Yes | Go to applicable DTC inspection. (See DTC TABLE [DSC HU/CM] ). |
| No | DTC troubleshooting completed. |