Service Cautions: Reassembly

• If removed, these parts should be replaced with new ones:

  Cotter pins	Gaskets	Locknuts (Nylon nuts)	Lock washers
  Oil seals	O-rings	Spring pins	-

• Standard values, such as torques and certain adjustments, must be strictly observed in the reassembly of all parts.

  Courtesy of MAZDA MOTORS CORP.

• Depending on location:
  • Sealant and gaskets, or both, should be applied to specified locations. When sealant is applied, parts should be installed before sealant hardens to prevent leakage.
  • Oil should be applied to the moving components of parts.
  • Specified oil or grease should be applied at the prescribed locations (such as oil seals) before reassembly.

Courtesy of MAZDA MOTORS CORP.