Parking Sensor Off Switch Inspection: Notes

NOTE:

The parking sensor OFF switch is integrated with the cluster switch No. 1.
For the parking sensor OFF switch removal/installation, refer to [CLUSTER SWITCH REMOVAL/INSTALLATION]. (See CLUSTER SWITCH REMOVAL/INSTALLATION .)

Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Disconnect the cluster switch No. 1 connector. (See CLUSTER SWITCH REMOVAL/INSTALLATION .)
Connect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
Attach the tester lead to the cluster switch No. 1 wiring harness-side connector and inspect voltage or continuity according to the Terminal Voltage Table (Reference) on the table.
- If not as specified, repair or replace the related wiring harness.
- If as specified, replace the cluster switch No. 1. (See CLUSTER SWITCH REMOVAL/INSTALLATION .)