PID/Data Monitor Table

-: Not applicable

PID AND DATA MONITOR PART SPECIFICATION (LFU)

PID	Unit/Operation	Data contents
DOOR_SW_ALL	Close/Open	Close: All doors are closed. Open: All doors are opened.
DOOR_SW_D	Close/Open	Close: Front door (driver's side) is closed. Open: Front door (driver's side) is open.
DOOR_SW_L/R	Close/Open	Close: Rear door (LH) is closed. Open: Rear door (LH) is open.
DOOR_SW_P	Close/Open	Close: Front door (passenger's side) is closed. Open: Front door (passenger's side) is open.
DOOR_SW_R/R	Close/Open	Close: Rear door (RH) is closed. Open: Rear door (RH) is open.
IMMOBI_TMTR_STAT	Off/On	Off: Communication with remote transmitter is not performed. On: Communication with remote transmitter is performed.
KICK_SEN_SW	Off/On	Displays foot-motion detection sensor status.
LLINK_SW_D	Unlock/Neutral/Lock/Failure	Unlock: Front door lock-link switch (driver's side) is in unlock. Neutral: Front door lock-link switch (driver's side) is not in lock and unlock. Lock: Front door lock-link switch (driver's side) is in lock. Failure: Front door lock-link switch (driver's side) has a malfunction.
LLINK_SW_P	Unlock/Lock	Unlock: Front door lock-link switch (passenger's side) is in unlock. Lock: Front door lock-link switch (passenger's side) is in lock.
PLG_SW	Off/On	Displays power liftgate (PLG) rear switch status.
POWER_MODE	OFF/ACC/IG-ON/CRANK	Displays ignition/main power status.
RESTRICTED_TMTR_NUM	-	Displays number of programmed keys for elderly person use.
RF_DATA_1	Initial/Transmitter/RF Response	Initial: RF signal is not received. Transmitter: Received RF signal was from remote transmitter operation. RF Response: Received RF signal was RF response to authorization transmission.
RF_DATA_2	Initial/No1/No2/No3/No4/No5/No6	Displays number of the remote transmitters programmed to the body control module (BCM)
T/LGT_LCK_SW	Off/On	Off: Door lock switch (liftgate) is off. On: Door lock switch (liftgate) is on.
T/LGT_SW	Close/Open	Close: Trunk lid/Liftgate is closed. Open: Trunk lid/Liftgate is open.
TIRE_TMTR_WU1_ID	-	This PID indicates registered wheel unit ID (wheel unit No. 1)
TIRE_TMTR_WU2_ID	-	This PID indicates registered wheel unit ID (wheel unit No. 2)
TIRE_TMTR_WU3_ID	-	This PID indicates registered wheel unit ID (wheel unit No. 3)
TIRE_TMTR_WU4_ID	-	This PID indicates registered wheel unit ID (wheel unit No. 4)
TMTR_NUM	-	Displays registration number of the remote transmitter
TMTR_STAT	FALSE/TRUE	FALSE: LF control unit ID is not programmed. TRUE: LF control unit ID is programmed.
TOUCH_SEN_LCK_L/F	Off/On	Off: Front door lock actuator motor is not operated to lock by touching the touch sensor (LF). On: Front door lock actuator motor is operated to lock by touching the touch sensor (LF).
TOUCH_SEN_LCK_R/F	Off/On	Off: Front door lock actuator motor is not operated to lock by touching the touch sensor (RF). On: Front door lock actuator motor is operated to lock by touching the touch sensor (RF).
TOUCH_SEN_ULCK_L/F	Off/On	Off: Front door lock actuator motor is not operated to unlock by touching the touch sensor (LF). On: Front door lock actuator motor is operated to unlock by touching the touch sensor (LF).
TOUCH_SEN_ULCK_R/F	Off/On	Off: Front door lock actuator motor is not operated to unlock by touching the touch sensor (RF). On: Front door lock actuator motor is operated to unlock by touching the touch sensor (RF).
VPWR_LIMP_HOME	V	Displays voltage at LF control unit power supply terminal (BATT2 (LIMP HOME))
VPWR_ROOM	V	Displays voltage at LF control unit power supply terminal (BATT1 (ROOM))
VSPD	Kph, Mph	Displays the vehicle speed signal from the electronically controlled brake unit/DSC HU/CM.