Using Battery Voltage Method (Vehicle without i-stop)
- Inspect the battery as follows after removing the battery filler caps, checking the water level, and adding water to the appropriate level if needed:
BATTERY DIAGNOSTIC PROCEDURE
| Step | Inspection | Results | Action |
|---|---|---|---|
| 1 | Measure the battery positive voltage. | 12.4 V or more | Go to Step 3. |
| Less than 12.4 V | Go to the next step. | ||
| 2 | Quick charge for 30 min and recheck voltage. | 12.4 V or more | Go to the next step. |
| Less than 12.4 V | Replace the battery. | ||
| 3 | Using the battery load tester, apply load current (see battery load test current) and record battery voltage after 15 s. Is voltage more than the specification? | Yes | Normal |
| No | Replace the battery. |
Battery load test current
55D23L (60A.h/20HR): 180 A
75D23L (65A.h/20HR): 195 A
LN2 (60A.h/20HR): 195 A
BATTERY STANDARD SPECIFICATION
| Battery temp. (°C {°F}) | Minimum voltage (V) |
|---|---|
| 4 {39} | 9.3 |
| 10 {50} | 9.4 |
| 16 {61} | 9.5 |
| 21 {70} | 9.6 |